Bests & Worsts Reviews from Amazon

It took a while to set up this product. Just wanted to pass along a couple of tips to help. It's easy to use and does waste some water, but it's much better than hauling buckets and trying to keep them clean. 1. Don't connect the hose to the part that goes on the faucet (water flow assembly) until after you have it screwed into the aerator hole. It twists much more easily. 2. Make sure you remove all of the coils out of the hose so that it lays flat before using each time. 3. Make sure your faucet is facing down. We have one that pulls out so you can spray with it, and it tilts to the side unless we put it in facing straight down. (oh, and if you have this type, there IS an aerator hole on the bottom of it, just flip it over and look -that's where it hooks up). 4. Buy a second thermometer so you can get the water temperature of the water from the faucet. Your water flow assembly will have to be open. When you're done, turn it off to fill up the hose. Make sure your vacuum is set to off. Once it's filled, turn water assembly to on first, and then vacuum to on. 5. If you don't want to waste as much water, you can reduce your water flow to a point where there is still suction, but lower water output. 6. Before you start to refill, turn vacuum to off and manually raise hose starting at tank so that all of your dirty water is out of the hose before refilling tank. Think that's it.