Bests & Worsts Reviews from Amazon

Update: 10/9/18 I contacted Spigen about the case and they sent a free replacement which fit perfectly. The cutout for the camera was larger so there were no issues. The packaging was also different and specifically referenced the XS model so they must be making new versions. I added photos of the packaging for the replacement case that worked. Original review 9/26/18: Like others have mentioned, this does not fit the iPhone XS because the camera is not in the same position as the iPhone X. It is hard to take a photo to show the problem so I will try to describe it here. I highlighted the problem areas in red. The worst fitting part is the bottom of the camera lens. In this area the case actually sits on top of the camera lens causing the case to slightly bulge outwards. If you put the phone flat on the table, you will notice it does not lie exactly flat. On the right side, there is very little clearance so that part of the case is also rubbing up against the lens. It is not as bad as the bottom part, but it is still a poor fit. Since the plastic in this area is soft, I ended up cutting the material around these areas with an X-acto knife to get the clearance so the case could fit around camera lens. Also, I included photos of the bottom areas around the speakers. This part is not a big deal to me, but there is very slight overlap of the case over one of the speaker holes on each side of the case.