Bests & Worsts Reviews from Amazon

I bought this to complete 80% lowers. This is so much better than I expected. There isn't any run out at all when I use my 5D Tactical Pro jig. I can drill right through the lower and out the trigger slot in less than one minute. When using a few drops of Tap Magic Cutting Fluid my bit doesn't even get hot at all. It has a little bit short of a stroke at 2 inches, so I put the bit in the chuck and raise the table up with the jig on the table so the bit goes through the guid hole on the jig and then lock the press table and then lock the drill press vice with my jig and lower in it to the press table. Then I add cutting fluid to the bit, then I hand turn the bit to make sure its in the right spot, then I turn the press on and drill the first hole I back off it a few times and add more fluid and I'm through in less than a minute. The 8 inch was a great purchase, the 10 inch would have been a little better, but the 8 is very affordable and still very usable. If you want to do perfect lowers get this drill press now.