Bests & Worsts Reviews from Amazon

I've had my "CHULUX Single Serve Coffee Maker Brewer for K Cups" for a year and a few months. Over that time, I've regularly made about 6 cups of perfect coffee with very few issues. I was a former owner of at least 6 Keurig brand coffee makers that worked, but failed after about 8 months.. YES.. all of them lasted ONLY about 8 months. Tried everything on YouTube to get them to work again... but nothing. So, I got fed up with their POOR quality and decided to try the CHULUX. This little thing is built like a "tank". It just keeps going! Coming from the BIG BULKY Keruig's to this small thing was a bit of a surprise.. but I now love it's smaller size and foot print. The Keurig tank and water handling system design is flawed. The whole system constantly holds water in the internal tubes. I found this IS a breeding ground for mold (after taking a few of mine apart trying to diagnose issues) that you cannot see (without disassembly) and cannot get rid of. Flushing with vinegar or their brand of cleaner only "kills" the mold. This leaves "dead slime" from the mold that gets hung up in the system. The Keurig water pumps are definitely inferior (longevity wise) to the CHULUX. They just will not hold up to 6 cups a day for more than about 8 months. As to those that have had the water overflow problem, the issue (CHULUX's) is there is a small particle strainer at the bottom of the "throat" where you pour the water in and it passes through the strainer into the tank. The holes are just too small and too few. Unless you slowly pour the water into the tank.. you will occasionally get a back flow. I feel this is a design flow on their part. What I have done is to remove this strainer (easily done with one finger) and use it without it. I've not had any issues with the tank getting foreign matter accumulated or in the machines operation. As to those with the grounds coming lose from the pods and getting into the coffee or on the machine itself or counter top. I've not had this issue. It could be the pods themselves have a defect or poorly made. It could be how you are putting the lid down on the pod and latching it shut. The motion should be swift once you start to the closure process. I make one swift movement and latch it immediately. As for the heat up time of the water. When I first received my CHULUX, my last old Keurig was still working. So, I timed how long each took from "start brewing button push" until coffee started flowing. The CHULUX was maybe 5 seconds slower than the Keurig. The improvements I would like to see would be a faster brew time ( I would pay more for this feature or such a model) and bigger holes in the water strainer.