Bests & Worsts Reviews from Amazon

For those of you who are in doubt of their own capacity and ability to properly install this like I was, DO NOT FEAR. I have never installed something like this before, and mind you, I am not the handy-wo/man kind of person either. But I had absolutely no issue installing this whatsoever, and as they promised, it is Cyrstal-clear indeed. When I actually taped the plastic film to the tapes, I was sure that I have ruined it for sure, and that I will have to restart the whole thing: I had sections that slightly overlapped, creating a fold. The way I attached the plastic was visibly and obviously a little skewed to one side. BUT, THESE SHRINK LIKE NOBODY'S BUSINESS. I wasn't sure if the shrinkage would solve the problem, but it sure did after about 15 minutes of blowdrying. Blow Drying Tip: when blowdrying, rather than blowing at the wrinkled area directly, sway the blow dryer gently around the wrinkle itself and the wrinkle will come out much faster. I've attached a photo of the finished product. You can't really see that there's a film except for the ghostly reflection on the film itself. You can kind of see the ruffled edges, for I just roughly trimmed the extras off with a scissor after I was done. Plastic Film Cutting Tip: have plenty of extra space. If you're anything like me, you will most likely end up with a bit slanted film application, and the extra allowance will make sure you're not left with a gap. For me, I first adjusted one entire film by the long length first, and didn't really trim the sides. I applied the top first, then the sides, then the bottom, THEN I cut any extra on the bottom. Seriously, I do not know what this plastic film is made of, but they shrink like nobody's business and I have to say I'm almost in disbelief of how crystal clear it turned out to be. Feel free to read the rest of my reviews on Amazon: I rarely write reviews here, but when I do, it's because I had a bit of doubt myself when purchasing it, but turned out to exceed my wildest imaginations.