Bests & Worsts Reviews from Amazon

After a year it's holding up without any issues. I applied it to a full glass screen door. Works like it should. i studied some YouTube videos on how to apply this before I applied it. I would consider myself a very handy man. This was easy for me because I studied, had patience, and used a lot of the soap to keep it wet while working it. My tip is to cut it slightly larger than the area your applying it to first. Then use painters tape to hang it over the window. Once it's hung, peal the backing off between the window and the film slowly from top to bottom. This is when you start spraying everything(window and sticky side of film.). The spray will pool between the backing and the film as you pull the backing down and that's ok. As you pull the backing down the film will start to lay itself to the window. Once all the backing is peeled, lightly squeegie one stripe straight down the center. Then make a cross. From there, lightly work from the center out. Apply more and more pressure as you go. You shouldn't have any bubbles this way. But if you do it's ok to peel the material up and spray and squeegee again. If there are tiny bubbles that's ok leave them alone they will go away as it dries. Once this process is done trim all the excess off and squeegee the film to the edges. I hope this helps. Enjoy