Bests & Worsts Reviews from Amazon

Ok, I had to make a review because I see so many negatives. This is an amazing product if used properly. By properly I mean as follows: First of all you MUST, MUST, MUST prepare the surfaces with incredible vigor. Get a rag and dampen it with Laquer thinner or Enamel reducer. NOT turpentine or mineral spirits. Once you think you've cleaned it thoroughly, go over it two more times. Now take the can and shake it well. LIGHTLY spray the item so that it barely covers the piece. You will notice at this point that the product isn't paint at all but that it's a dye and is slowly etching into the vinyl or leather. Now wait 10 or 15 more minutes and spray another light coat. It should still not completely cover the item. Wait another 10 or 15 minutes and hit it with another coat. Continue this until you have full coverage. Now here's the most important part...if the item is a high usage piece (Such as seats or arm rests), set it aside and let it cure for no less than two weeks. I know, it's tough but necessary. I've used this product on vinyl seats and 4 years later they still look brand new. It's hard to believe that you can "paint" vinyl seats but it really, really works.