Bests & Worsts Reviews from Amazon

My son likes this mouse a lot, but, like many reviews have stated, it is a pain that the very bright decorative lights on the mouse cannot be turned off easily. Well, here are the details on how to get those lights off. 1. The 2 screws holding the mouse together are under the two larger nylon pads the mouse slides on. Carefully pry those off with an xacto knife or similar, and remove the screws. See picture. Then pry with a fingernail on the seam of the mouse near the screws to separate the halves. You have to slide one half of the mouse forward and the other back to completely separate the mouse halves at the point where the USB cord goes in. Be gentle, there are wires holding the two halves together. 2. There are two wire bundles between the top and bottoms halves of the mouse: a three-wire and a four-wire. Disconnect the connector for the three-wire bundle by catching the back of the connector with a fingernail and pulling. See picture of separated connector. 3. Reassemble mouse.