Bests & Worsts Reviews from Amazon

It's a very nice and solid enclosure. I'm using it with Samsung 970 EVO PLUS... There are way to many VINE reviews for this product. Normally if product is really good it should have tons of USER ( Non Vine ) reviews... Vine users are sponsored to get reviews... Doesn't matter if they're unbias, they're not natural users who come to amazon to buy the specific product in question so their reviews / use are different than a regular user who comes to amazon looking for a specific to use... This summary is primarily for those who will be copying large files ( 60GB to 500GB + ) from the Enclosure ( which are reads ) to any other device. The copies always abort prematurely in the middle of copying when enclosure is connected to USB-C port that supports USB 3.1 Gen 2.. If Enclosure is connected to regular USB-A port that supports USB 3.1 Gen 1, then copies ( read from enclosure ) works 90% of the time, meaning copies do not stop / abort in the middle... I'll update refine and update this review later and make it more succinct later... I spent a lot of money trying to get reads ( copies from the enclosure while it's connected to the USB-C port USB 3.1 Gen 2 ) to work... To eliminate and isolate issues, I purchased and tried following: two Samsung 970 EVO 1TB NVMe PCIe, M.2, one Samsung 970 EVO Plus 1TB NVMe PCIe, M.2, one Dell XPS 15 9570 32GB Mem, 1TB NVMe, PCIe, M.2 SSD )... I've tried three different NVMe, PCIe, M.2 enclosures and they all exhibit the exact same behavior: Write / Copy large file from any source to enclosure with 970 EVO or 970 EVO plus installed while the Enclosure is connected to USB-C port USB 3.1 Gen 2 and writes / copy to enclosure " ALWAYS " works 100% of time no issues whatsoever... However, then try to copy the exact same file that was written to enclosure with 970 EVO or 970 EVO Plus NVMe, PCIe, M.2 to any other drive ( internal or external ) and the copy will start but ALWAYS files to complete... ALWAYS fails to complete no matter device / memory / drive it's being written to... Irony is the Samsung T5 1TB enclosure with 1TB inside it NEVER FAILS when copying from it... Also there are no thermo issues as I have fan blowing directly on enclosures and it's cool to cold during whole duration of copy... More details below. I will update this review later... Anyway, Nothing to complain about except fact that this enclosure as well as the others below " ALWAYS " fail during middle of copying when trying to copy large files from the enclosure ( which are READS from Enclosure ) to any of the following drives when the enclosure is connected to a USB-C port that is Gen 2 10Gbps and also Thunderbolt... Windows 10 Pro, Dell XPS 15 9550 & 9570 both systems: 32GB Mem, 1TB SSD NMVe, PCIe, M.2 Plug Sabrent Enclosure with 970 EVO Plus in Enclosure to USB-C port... WRITES to the Enclosure are very, very fast as expected and never, ever fail or stop prematurely during writes ( copies ) to the enclosure... However, when trying to copy ( for purpose of backing up file ) the exact same file that was just written to the enclosure, copy from enclosure fails in middle of copying from the enclosure to Internal Drive in XPS 15 ( NVMe, PCIe, M.2 SSD 1TB PM951 ) and it also fails in middle of copying from enclosure when copying to any of the following USB devices: USB 3.1 devices: Seagate 5TB Portable, Seagate 8TB HUB, WD 4TB Portable NVMe PCIe M.2 Internal Samsung PM951 1TB I've tried numerous times, trying to copy from enclosure while it was in the USB-C Port I've retrimmed the internal drive in the XPS 15s before copying from enclosure and writing to the internal drives PM951 NVMe PCIe M.2... It ALWAYS FAILS TO COPY same large file that was just written to enclosure. File sizes between 80GB to 450GB... Steadily copies ( 100GB to 500GB+ ) file from enclosure to internal drive in XPS 15 at 750MB/s then abruptly starts slowing down, then stops 30%, 40%, 50%, 60% of way ( completed ), but never successfully completes copying... IT NEVER COMPLETES COPYING FROM USB-C PORT SAME EXACT FILE THAT WAS WRITTEN TO IT TO ANY DEVICE.... HOWEVER, IF ENCLOSURE IS CONNECTED TO USB-A PORT USB 3.1 it will successfully copy from the enclosure the same file 90% of the time to any drive internal or external at approximately 375MB/s... This enclosure isn't the only one affected. I've tried following enclosures and they all exhibit the same behavior so I suspect there's something about the USB-C port that saturates and dies during middle of copying... I saw other reports and reviews on web concerning iMac and MacBook Pro's Copies FROM the enclosures only work when not in a USB-C port USB 3.1 Gen 2 Sabrent Type-C Enclsoure for NMVe PCIe M Key M.2 SSD QNINE NVMe M.2 USB 3.1 Gen2 SHINESTAR NVME NMVe PCIe M Key M.2