Bests & Worsts Reviews from Amazon

I work as a network technician and have used APC equipment for many years. Their high-end units have always done well for us. For many years, I also used their Smart-UPS brand for my home network needs. As they've become old and had problems, it became more economical to replace them, instead of fixing them, especially, since for my desktops, the industry was moving to USB for signaling, and away from serial ports. My rack still has older 1400 VA SU units using SNMP management cards, but I needed a new desktop solution. For the past three years, I stuck to APC's consumer products and have been very disappointed. They have more problems than the older units I've grown to love, and because they change models so often, it's harder to find a battery replacement. Plus, they just have a sort of cheapness about them. With my latest computer purchase, a dual quad Mac Pro, my older 800VA APC just couldn't handle it. So, I decided to try this Cyberpower 1500 and have been very pleased with it, using it for about 2 months so far. The signaling and reported time is more reliable than the APC I was using. Although it should be said, any consumer UPS will not guarantee exact runtimes, load measurements, etc. - For what you are paying for this amount of capacity, some sacrifice must be realized. If you do your calculations correctly, and use it as needed (surges, brown-outs and limited black-outs), these units will fulfill your needs. If you need super accurate measurements and reliable AC power generation, then you should consider a high end unit, such as what APC offers for data centers. The load reading for this unit, when measured with a Kill-A-Watt is pretty accurate. I like the soft blue lighting with auto-off. I connect my two, 24" LCDs to the APC 800VA unit, and the Cyberpower handles the Mac Pro with three, external FireWire drives with no problems. Testing it, by turning off the circuit breaker (shouldn't pull the cord from the wall), reports about 20 minutes of runtime, which seems about right. I've left it on battery power for about 10 minutes, and the readings remained fairly constant. I live out in the country at the end of our power grid, so I get a lot of "dirty" power. Brown-outs are common, and my larger UPS units have the ability to generate statistical logs each day of the power fluctuation. I feel pretty safe with this unit, and wouldn't hesitate to purchase another one. Lastly, the software both Cyberpower and APC provides for the Mac OS, is really bad! I prefer to just use the Mac's SysPrefs to configure the UPS settings and leave it at that. Both companies desperately need a re-write of their OS X software.