Bests & Worsts Reviews from Amazon

We had previously ordered and returned a much more expensive Hyundai bidet. It would not work properly with cold water only. If not careful with the valve, water sprayed out the hot water connection orfice and we did not want to connect hot water. The T fitting provided to tap the water line leaked unless a LOT of Teflon tape was used. It was also bulky and the handle touched the right leg when sitting. We decided to order the H2GO MB 110 for less than half the price, not expecting much. We were pleasantly surprised. The unit is basic and functional. It is very unobtrusive when attached to the toilet. It is installed by removing the toilet seat and placing the unit over the 2 holes at the back of the toilet bowl and reinstalling the seat over the top of it. The attachment holes on the bidet have universal adjustability via sliding plates so it should fit most toilets. The water supply hose is attached by first sliding a plastic nut on the hose then pushing the hose tightly onto a nipple, then sliding the nut up and tightening, which makes a compression attachment. NO LEAKS! Works the same on the other end where a T in fitting is provided to tap your incoming water line for the toilet. A Simple install. It looks OK when installed, but the main thing is it works really well! Water volume is controlled by a dial type valve you turn to the right to increase volume. If you want it sprays so hard it stings, but you have complete control over the velocity at which you spray your (ahem). Overall a good product that performs well. We are satisfied.