Bests & Worsts Reviews from Amazon

First of all, the negative reviews for this product were left by people who din't rate the product, but rated the shipping or were mad because they can't read a product description and thought this was a multi-function printer, which it is clearly not. The lowest one-star review was from a reviewer who didn't know what they were doing. A simple google search produced an answer to solving the power saving issue, straight from HP's web site I'll explain that at the end of this review. This printer was purchased for use in an office environment running primarily macs with a few microsoft surface pros in the mix. Initial configuration is done via the touch screen on the printer itself. It's very simple and you can choose a setup wizard type scenario (self-managed) or more of a manual mode for IT people who want to set up a static IP. I chose the latter. After the quick initial setup on the printer touchscreen, the rest was done on a macbook pro and involved downloading the setup software from HP. The install wizard is as easy as it gets to connect via wifi or ethernet. If you want to access settings again at a later time or tweak specific options, you can access the printer in a web browser via its IP address/default url for the embedded web server in the instructions if you didn't set a static IP (which you always should). Adding the printer to other networked computers is as easy as going into your OS's control panel/system preferences printer settings and adding the printer which should show up on your network. Print quality is great. We replaced an old HP 4700dn color laser which cost significantly more at the time of purchase and see no different in quality. Print speed is also solid. The pull out paper tray is the only thing on this that feels a little cheap. Otherwise it's a hefty printer that seems well-built. To mitigate or eliminate the auto-shutdown mode, go to Network - Wired- IPv4 Configuration (if you did this already in the initial touch screen setup using the IT-managed option, skip to the next part.) Select Manual IP, and make it something like 192.168.2.109. Change the last 3 digits to suit your needs depending on IP addresses already in use. Then, go to Settings- Power Management - Shutdown Mode, set it to 8 hours just because and, most importantly, check the "Disable shutdown when ports are active" box. I can confirm that this will completely eliminate this issue when the printer is connected via ethernet and has a static IP, and possibly for USB connections as well. Feel free to comment if it works for wifi only connections.