Bests & Worsts Reviews from Amazon

Listened to other reviewer's modifications to make it better and wow, it is doing exactly what I wanted. Modification 1: Add 8 x M6 lock washers to the cross sections on both legs. This will significantly add to stability. Modification 2: Throw away the pins used to keep the roller knobs on and replace with two 8-32 x 1-1/4 inch machine screws and 8-32 nylon insert lock nuts. That will make the putting the knobs on very easy and just as easy to get back off. Total cost for mods from Home Depot: $2. I bought two, made these two changes and love them. I put a sliding miter saw on one, opened the clamp until it firmly pushed into the legs of the saw and now they are like one unit. If that had not worked, I would have mounted saw to plywood with a 2x4 attached and just clamped down on the 2x4. Saved $100 over buying the specific stand for my saw and this one even folds up (yes the saw stays connected and folds down with the top). The second will be for jig saw and other table top work. Total cost: ~$50 with the current B&D $10 discount.