1,160
people found this helpful, as of 2023
ranked #7,996 most helpful
out of 571,544,897 reviews
★★★★☆
How to make sure your headsets works in easy steps.
Once I was able to get the unit to work, it worked as advertised. My hearing is going bad with age, this lets me crank up the sound without disturbing others in the room. The TV can be muted or low sound level and I can have the ear phones cranked up.
Here are some VERY useful tips to insure you successfully get your set working if you order. You'll only need to do this once to set things up.
(1) plug the charger stand into the wall power, then put the batteries in the headset, let the unit charge over night. The red charging light will come on when the headset is in the stand and go out when the headset is removed. The red light never changes to signal a charge, its either on when the set is in the cradle or off when they are not.
(2) then the next day, plug the charging stand sound jacks into the "output" sound jacks of your TV, (((FYI If everything is working right, you'll always see a red light on the charging stand anytime the unit is plugged into the wall AND the headset is hanging on the stand, the green light above the charging light will come on only when the TV on and is sending sound to the unit )))
(3) Turn on your TV, go to your TV's set up menu, find the Audio or sound section, find the place where you can fix the analog and/or digital sound to "fixed output", (it may say max output depending on your TV brand) and save the settings in your TV (if you do not do this step, the sound in your headphones will go up and down when you raise or lower your TV sound, changing this setting in your TV allows people in the room to adjust the TV speakers and will allow you to adjust your headphone set independently of each other) YOU SHOULD SEE A GREEN LIGHT ON THE CHARGING STAND IF YOUR TV IS OUTPUTTING TO IT. If not, figure out what is connected up wrong at your TV.
(4) Take the headphones off the charger stand, turn on the head phones, adjust the sound level to about midway, put them on your head, then begin to adjust the tune dial on the headset. As you rotate the tuning dial you will hear the static sound change. Keep adjusting until you hear only the sound from the TV program you are watching and no static noise. Adjust your headset volume as needed too. If you are getting static and sound, keep trying with the tuning dial on the headset until only clear sound comes through.
After figuring out how to make these work, I'm betting all of the returns and poor ratings are related to the poor instructions on set up instructions that come with these headphones. THEY ACTUALLY WORK GREAT, but I almost sent them back because it took me awhile to figure out how to properly set them up.
If you or your spouse is having hearing problems and you do not like having the TV volume cranked up, these are a great way to return peace to the house. I would have given them a 5 star rating except for the weak instructions that came with the headset.
September 2016 · Electronics · verified purchase