Bests & Worsts Reviews from Amazon

Just received this printer and I have to say the print quality is excellent, the printing speed typical of inkjets, and the fact that I don't have to buy another cartridge - OUTSTANDING!!! Care should be taken when filling the tanks for the first time, wear gloves and make sure you have a paper towel handy for drips but otherwise this is a simple foolproof process. Tanks are clearly labeled with the color as well as ink number, there are rubber caps and a spot to hold the caps for each tank while filling. The ink that is supplied fills the tanks to capacity, I'll let you know in about 2 years if they last as they say they will. The supplied ink is supposed to be good for 6500 prints, so that may be awhile. Once powered up the device takes about 20 minutes or so to prep itself for the first time then it is ready to print. My first print was a photograph and the resulting print was excellent quality. I used some pretty cheap thin stock, but the image was vivid and the color looked perfect. I had expected a few bad prints to warm the device up but it's prepping cycle was sufficient to feed the ink to the empty print heads and get it all warmed up and completely ready to print on demand. This multi-function device replaces a HP 7900 series that was huge and bulky in comparison. This printer takes a little over half the space of the HP, a quality not easily overlooked on my very cluttered desk. Scanning was perfect as well as the 1 touch copy. I gave these features a quick test with a high resolution image. Without a microscope the original and copy are indistinguishable from one another. I highly recommend that if your shopping for a inkjet you invest in this product, it does not disappoint. I review products professionally, so I see a lot of both high and low quality items crossing my desk. I am not reviewing this product professionally but from one consumer to another. If this review helped your own decision, please click the YES button next to "Was this review helpful”