Bests & Worsts Reviews from Amazon

This is about 7/8" long on the outside, about 5/8" wide on the outside, and about 5/8" long on the inside. The wire is about 1/8" thick. There's not a lot of info in the description, so I bought this with mostly optimism and hope. I was hoping this would work for my pets' ID tags. I haaaaaate those little split rings and the S-clamps that come with ID tags, but I have small/medium dogs so the tags can not hang down very far. This clip is only a tiny bit lower than the hateful little split rings would be. The dogs have a variety of rabies tags, microchip tags, and personalized ID tags from multiple manufacturers. All of the tags slid right onto the clip. Yes! No problems getting them on, even the tags that have a "key collar" to mute the jangling. The gate clip opening went onto smaller D-rings easily. It took a little pushing to get it open enough to fit onto thicker D-rings or harness O-rings, but it did clip on and close again. I think it'll come back off too. At least it's got a good strong closure mechanism! The tags are not noticeably lower than they were before. The tags won't interfere with the dogs' legs or swing around and smack them in the chest. Excellent. From the description here, I wasn't sure how the clip might hold up to the beating the dogs will give it, since they will bang their tags on anything they brush their chest up against (bushes, food bowls, etc). The problem with S-clamps is that they snag or they deform from this kind of abuse. But this clip seems extremely sturdy and the gate clip seems quite strong, so I have high hopes. I'll come back and edit the review if it gives out quickly, but I hope it won't be an issue :) The fit to pet ID tags and the size of this clip are perfect. I hope it's as durable as it looks.