Bests & Worsts Reviews from Amazon

I bought this jig several weeks ago. It was easy to set up and use. To date I have only made half blind dovetail joints. Everything worked fine. I felt the manual was not as clear as it could have been but after a few mistakes I was able to make flawless joints. The quality of the unit appears to be quite good. Nothing flimsy or cheap. I was attracted to the carbided tipped bits but a little concerned that I may find a delay in getting the 'custom' PC bits if something happens to the original bits (I notice that Amazon does not offer the bits for sale yet!). I am a little concerned that PC did not provide lock nuts for the templet stops but, surprisingly, the set nuts have not wandered from their set points. Also, the knobs that set the tension position on the material clamps have a tendency to loosen up and if one is not careful the material may not be secured as tight as it should be. Finally, it would have been nice if PC had put the part numbers on the templets so that a novice could easlily identify them. Overall, a good product at a reasonable price. Since I originally reviewed this item I have read where many other people have had almost no success in obtaining the dovetail bits for this unit. I have also learned that PC and Delta are now being bought out by DeWalt on 4/1/05 which might only add to the difficulty (at least temporarily) of getting these bits. Fortunately, I called PC and they sent me to their distributor in Atlanta which had 8 of the 43776PC bits. You can reach them at 404-608-0006.