Bests & Worsts Reviews from Amazon

I bought this work station & a dremel to go with it to use as a PRECISION drill press for handcrafting jewellery. This was to accompany the Italian flex shaft I already own. Intending to accurately drill holes in Sterling Silver & Gold, I have tried this many times now to no avail. There is too much movement in the work station to accurately do anything. And yes my Dremel work station is bolted to my work bench. While the work station can be manipulated in many ways/heights & angles these adjustments become inaccurate upon tightening up the thumb screws to lock these positions in. There is so much movement in the tightening, that you never get close to what you were aiming for by the time it is secure enough to use. As well as this the 'pull down leaver' is spongy and has side to side movement during the last centimetre or so of travel - no hole is ever drilled exactly in the planned position. The spongy pull down leaver also has a spring return, which initially looked usefull - until you drill many holes in sequence, then it just becomes irritating having the leaver spring-back EVERY time. Finally the changing of bits (I am using .8mm twist bits) is slow and cumbersome as you need to swing the drill to the side just to get enough room to manipulate the chuck release etc. The chuck release is hard to access as it is recessed back from the nose of the drill press (where the dremel screws into the drill press assembly) Overall I was looking forward to having a micro-drill press when I bough these 2 items from Bunnings a few months back. Since then I have become frustrated with this clumsy product and wish I'd never bought it. Basically the tolerances are too wide and NOT for delicate metal work.