Bests & Worsts Reviews from Amazon

I bought this machine after looking at several other bench top mortisers. I bought it for a specific propose but I have concluded it has a fatal flaw which makes it useless to me. First I'll start with the good stuff. It has a lot better clamps and adjustments then other machines you can get in its class. It also has decent horsepower. It did not bog at all even with very hard wood. It would probably be fine for softer wood applications however for what I was using it for it just didn't hack it. I was working with Ipe which is a pretty hard wood. The problem is the gear that is that controls the up and down motion is attached to it's grooved shank with a very small tooth. The rest of the machine is built like a rock but it really doesn't matter since this tooth will easily shear if you try to use the machine with moderate force. I have done this twice already in just a few minutes of use. If you have a lighter application than I do it might work OK for you. However I still feel this is a design flaw so I must rate the machine accordingly. In my view wood working tools should be rock solid and it fact most are. This is first shop tool I have had this much trouble with. My saws, drill press, planer and other equipment all work fine even with exotic hardwoods.