Bests & Worsts Reviews from Amazon

It's common knowledge these days that the old practice of putting wood studs and then fiberglass batts against a foundation wall and then sealing that with a plastic vapor barrier is a recipe for mold and insulation damage from condensation through the foundation wall. (see Fine Homebuilding No. 169 March 2005 p. 78, Fine Homebuilding No. 162, May 2004 p. 52, also the buildingscience dot com publications even the Dept. of Energy and HUD guildelines.) But this author recommends doing just that on pages 99 and 100. His only discussion of foam panels is in the context of using foam panels in between already constructed studs and then he complains that it is difficult to get the panels to fit between the studs. That is a silly way to use foam panels. He doesn't discuss the current recommended practice of installing the foam panels *first*, up against the foundation wall, and then framing or furring strips against the foam. That is much better because then the wood is never in contact with the foundation wall and provides no food (i.e., damp wood) for mold to grow. The biggest issue with finishing a basement is doing so in a way that prevents unhealthy mold and that "oh-this-smells-like-a-basement" quality of so many basements. Wood framing against a foundation wall, with fiberglass batts keeping a moist environment, and all trapped by a plastic sheet, is a sure fire recipe for just such a brew. It makes me doubt most of the other information. Tauton Press should revise the book to reflect its own current writing on the subject.