Bests & Worsts Reviews from Amazon

Everything was in the box and the instruction were easy to understand. It took me 45 minutes but I couldn't finish assemble the table because the 2 slots where the U bracket inserts on the table bottom on the right side where only half way machined trhu. They are not round holes that I could have just drill, these are rectangular and long shaped. Basically I would have need a replacement table top for it to work. Since I was able to still put it up, with only 1 bracket, I was trying to decide what to do, since the table looks nice but is light (on the flimsy/wobbly side) I bought it to use for: drawing/sketching. It looks fine when flat and parallel to the floor, you still need an adjustable height chair. WHAT'S BAD: When I TILTED up the surface to about 45 degrees, (or #2 of the 3 holes on the bracket) where I will use it the most, the bottom edge (where the pencil ledge is) came down soo low that with 3 1/2 inch of space left I couldn't even fit my legs under when sitting down.( I'm 5.5 115lb, my chair was on lowest set up 17"H.) The height of the table would need to be adjustable in order to work for me when tilted up. The low edge is only 17" from the floor when tilted all the way up, hole #3, at almost 90 degrees, and 20 1/2" from floor on hole#2, about 45degrees. I'm returning the table of course. I added some photos, I hope it helps somebody also to make the right decision and save time eventually.