Bests & Worsts Reviews from Amazon

Loved my past three or four Brother laser printers. Reliable, fast machines, few issues. And when the toner cartridge was running low on one of them, I kept printing until I decided when the print quality was too light. Only then would I replace the cartridge. This model MFCL2710DW however will not let you print when the toner goes low even though the quality of the previous print is fine. I found this workaround online and it allowed the machine to continue. This took a few tries but eventually did work: Open front door of printer (to reveal the cartridge mechanism) and “Front Door Open” will flash on the monitor. Good. Next, press STOP/EXIT and CLEAR at the SAME TIME(quick press) Immediately after, press CLEAR once again. A menu called RESET MENU will appear. Click the DOWN ARROW until you see TNR-STD Click OKAY Click UP ARROW To Confirm the reset