Bests & Worsts Reviews from Amazon

Before I bought the corded Dremel Multi I used to use hand tools. The results were good but took time to produce. I then saw an advert on the television for the Dremel. I then went to a tool shop to see it and it's rivals. The only other competitor was the Black and Decker corded Wizard. The wizard lost out to the Dremel due to it's narrower range of operating speeds and it's greater size. The Dremel also had a far greater range of accessories to supplement it's use. >I really appreciate the way that the Dremel can do what it does so quickly so well. It can carve letters, polish to a very high standard and grind metal as well as the capability to engrave metals as well. The fact that it does not take up a lot of room, especially when you consider the wide range of capabilities it has. >To turn the Dremel on you slide the switch to one of the numbers on the scale, the further along you go the faster the shaft rotates. You set the speed according to the one recommended in the instruction manual which has pictures to guide you as well. You then apply the tool to the surface you are working on and gently do the polishing etc., but not too hard as it can damage the tool. >I had my Dremel fitted with a optional chuck which makes bit changes faster and more convenient than the standard collet bits. You just loosen the chuck, put a bit in, re-tighten the chuck and select the right speed and you are ready to go. It also has a decent grip for easy and comfortable holding. It is quite simply a joy to use for craft. Special shafts can be fitted to the end as well, so there is little that has been missed out. > The flexible shaft lets me work in places where the tool can't be inserted especially some places in my jeep! It's also easier to hold the flexible shaft when working on small workpieces like fishing lures etc.