Bests & Worsts Reviews from Amazon

This case is going back right now. The first card I inserted was a PNY and it fit a bit too snug, but it fit. Removing the card is a pain, you have to dig with your fingernail and actually *pry* the card back out. The second card I inserted was a Sandisk and the card wouldn't fit entirely into the slot. Applying minimal force to the card, the very hard rubber of the slot caused the Sandisk case to split in half along the edge seam. SNAP! $25 card down the drain. Glad I didn't try to insert one of my more expensive cards first. I then tested the slots with some old/slow/corrupted Sandisk cards that I no longer use to make sure it wasn't a faulty card, but the super tight, very hard rubber slots cracked every single one while both inserting or removing the card. NO WAY WILL I PUT ANOTHER CARD INTO THIS FREAKING SD DEATHTRAP. Kora, if you are listening, go with a lower density rubber or even open cell foam!!! Sheesh.