Bests & Worsts Reviews from Amazon

The first three bits that I attempted to use from this set -- the 2.0 flat head, the T6 torx, and the T10 torx -- all bent when I applied moderate pressure to some tight screws. To make matters worse, the T6 torx bit actually snapped off at the tip inside a t6 torx screw head. The FIRST three bits BENT ... and one SNAPPED. This is not a good driver set. Maybe I just got a bad set with poor quality control ... but clearly these bits are not heat treated properly and are WAY TOO SOFT. If you only need to remove screws that are barely threaded into something then this set "might" work great. If you need to remove stubborn screws then DO NOT buy this set. If you need to remove screws that have been secured with blue loctite then DO NOT buy this set. I wish I could get my money back because I feel like I'm the victim of fraud.