Bests & Worsts Reviews from Amazon

I used this to cover a range hood that was almond and needed to match a new stainless range. It was easy to use and does a good job of making the hood look almost as good as real stainless. I would have given it 5 stars, but there were some flaws in the paper at the beginning and at the end and the tape used to hold it together is difficult to remove without leaving a sticky mess, making it difficult to use the entire roll. I unrolled it and worked from the inside of the roll out for this reason. I recommend you order twice as much as you think you need to allow for this. Comes wrapped around a cardboard roll which keeps it from bending. Does not bubble if applied correctly - you need to carefully smooth as you pull off the backing, and only pull off backing lengthwise to prevent bubbling. If you do get a bubble that cannot be fixed with removing and repositioning, then use a needle or pin to carefully prick and resmooth to remove the air bubble. Adhesive is easy to reposition. Take your time and plan out the application for best results. Can use a razor knife to trim if necessary. See uploaded image.